Straight sections (Ø.187) have a grid pattern of 2" x 4" and are available in standard widths of 6", 8", 12", 18" and 24". Lengths can be ordered in 1', 2,' 5', 8' and 10' with a depth/height of either 2", 4" or 6". See finish chart for standard colors; safety yellow is standard. Custom sizes and colors are available. Sections include interconnecting hardware.

Pre-fabricated junctions (Ø.187) have a grid pattern of 2" x 4" and are available in standard widths of 6", 8", 12", 18" and 24" with a depth/height of 2", 4" or 6". Junctions/intersections lengths are standard: 12" wide or less come 2’ in length and junctions/intersections more than 12" wide come 3’ in length. All drops are available in 12", 18" or 24" lengths. See finish chart for colors; safety yellow is standard. Custom colors are available. Junctions/intersections include interconnecting hardware

Pre-fabricated reducers (Ø.187) are available in standard configurations with a grid pattern of 2" x 4" and a depth/height of 2", 4" or 6" (24”-18”, 18”-12”, 12”-8” and 8”-6” are standard). All reducers are 2' in length. See finish chart for standard colors; safety yellow is standard. Custom colors are available. Sections include interconnecting hardware.

CM50xx-x ¼" Threaded Rod Kit. Includes (1) support bracket (1) hold down bracket (2) ¼" flat washer (2) ¼" nuts (1) 6" silicone protective tube. Threaded rod not included.

CM51xx-x 3/8" Threaded Rod Kit. Includes (1) support bracket (1) hold down bracket (2) 3/8" flat washer (2) 3/8" nuts (1) 6" silicone protective tube. Threaded rod not included.

CM52xx-x ¼" Threaded Rod Kit. Includes (1) support bracket (2) ¼" coupling nuts (4) ¼" flat washers (4) ¼" nuts. Threaded rod not included.

CM53xx-x 3/8” threaded rod kit. Includes (1) support bracket (2) 3/8" coupling nuts (4) 3/8" flat washers (4) 3/8" nuts. Threaded rod not included.

05-CM60 Coupling Nut -¼"-20
05-CM61 Coupling Nut - 3⁄8"-16

1/4" CM62 Flat Washer
3/8" CM63 Flat Washer

1/4"-20 CM65
3/8"-16 CM66
5/16"-18 CM67

5/16"-18 x 3/4" CM68
5/16"-18 x 1 1/4" CM72

Ground Bolt 05-2-600-727

Beam Clamp 1/4" thread rod 05-CM100
Beam Clamp 3/8" thread rod 05-CM101

6" protective tubing for 1/4" & 3/8" threaded rod
CM69

• Galvanized steel or powder coated to provide a smooth protective surface for cable pulling

• Can be supplied pre-assembled to cable trays or installed in the field with #05-2-500985 Splice Washer Assembly, 4/plate

• Available in easy to handle 59” lengths

• Fits cable trays 6, 8, 12, 18 and 24 inches wide

#05-2-500982
Used to secure tray sections to hanging or floor supports. Material is steel wire powder coated chrome color 4” long.

Splice Washer Usage Per Tray Connection
6"	3 Kits
8"	3 Kits
12"	4 Kits
18"	4 Kits
24"	5 Kits

#05-2-500983 for a 2” deep tray
#05-2-500984 for a 4” deep tray

The dividers are made from galvanized zinc plated steel and are 5’ long. (requires two Splice Washer Assembly #05-2-500985 used to secure to each tray section)

Ratchet CM99

Cable Tray Cutter 05-2-600728

1/4" ROD
Part Number	Width
05-5002-X	2'
05-5004-X	4"
05-5006-X	6"
05-5008-X	8"
05-5012-X	12"
05-5018-X	18"
05-5024-X	24"

3/8" ROD
Part Number	Width
05-5106-X	6"
05-5108-X	8"
05-5112-X	12"
05-5118-X	18"
05-5124-X	24"

 

1/4" ROD
Part Number	Width
05-5206-X	6"
05-5208-X	8"
05-5212-X	12"
05-5218-X	18"
05-5224-X	24"

3/8" ROD
Part Number	Width
05-5306-X	6"
05-5308-X	8"
05-5312-X	12"
05-5318-X	18"
05-5324-X	24"

 

Ø.187" - 4" Width

Waterfall CM59

Universal Loop CM70xx

Ø.187" = 02
Ø.250" = 03

Use four per tray

CM58-5 Curved Tray Extension

05-CM75-3 includes (2) Angle Supports and (2) "U" clamps.
Clamps fit up to a 1 ½” dis. Pedestal

05-CM75-3 Raised Floor Pedestal Bridge Support Kit - includes
(1) Bridge Support and (2) "U" clamps
Spans 24 inch center to center floor pedestals up to 1 1/2" dia.